MarineDieselXRef Yanmar
Yanmar › Part 196420-06140

196420-06140

SEAL TC253506, OIL

196420-06140 — SEAL TC253506, OIL exploded diagram
Ref 20
Fig 6
SD_20_30_31
Garter spring and seal facing

The water-facing lip on the prop shaft has a garter spring sitting in seawater. A carbon-steel spring rusts there. When you order by size, ask for FKM (brown, often sold as Viton). Those usually come with a stainless V2A spring. SKF marks that compound with a V, for example HMSA10 V. A V4A (316) spring is a special order from the seal house. Black NBR seals usually have a rusting steel spring. Some owners swap the steel spring for an O-ring. That's a field hack, common on a raw-water pump. On a saildrive prop shaft the lip needs the designed spring load. skipperpete on Cruisers Forum says keep the garter spring on that shaft. If you only have an NBR seal, reuse the stainless spring from a used oil-side OEM seal. Yanmar faces one lip at the oil and one at the water. Some owners reverse one or both so both lips keep water out. See Hacking Family on Ocelot and the Cruisers Forum SD20 water-in-drive thread. Brickwede's Freudenberg notes cover V2A versus V4A springs. If a spring then sits in seawater, it needs to be stainless.

Forum discussion

196420-06140 — Affiliate Parts Search

As an Amazon Associate I earn from qualifying purchases. Other links (eBay, AliExpress) are also affiliate links. They help pay for the site, at no extra cost to you. More

Fitted to

Engines, drives and generators whose parts catalogue lists this part. Open any for its exploded parts list.

Saildrives & gearboxes

Standard component cross-ref

An industry-standard component — buy from any bearing / seal / o-ring house; just specify the designation.

Equivalent P/NBrandDescriptionSourceConfidenceShop
TC 25x35x6 Seal Oil seal TC 25x35x6 (also sold as Skf/Cr TC 25x35x6) SD_20_30_31.pdf p10 description confirmed

Used in 1 place

Every catalog figure this part is placed in, the model(s) it applies to, and its reference/level/quantity.

Model(s)CatalogFigurePageRefLevQty
Fig 6 SD20, SD30 SD_20_30_31 Fig 6. SHIFT LEVER(PREVIOUS) 10 20 1 1