MarineDieselXRef Yanmar
Yanmar › Part 144626-91570

144626-91570 Marine

SENDER UNIT

Coolant gauge sender

This is the sender for Yanmar's analogue water-temperature gauge. On a 3JH2-TE the same sender also runs a VDO Oceanlink tach. The curve is the European VDO standard: about 287 ohms at 40°C, about 38 ohms at 100°C, and about 23 ohms at 120°C. Match that curve. A US-ohm car sender (about 240 ohms cold and 33 ohms hot) reads in the wrong place on this gauge and on the Oceanlink. The current number is 144626-91590. 144626-91570 is the earlier number. The buzzer switch is a separate part, 120130-91370, and it closes near 100°C. Leave that switch fitted if you still want the alarm.

Clip terminal and an M4 stud

The Yanmar sender uses a clip on a button terminal. A 6.3 mm spade does not take that clip. The fitting you want is an M4 stud, so the wire goes on with a ring terminal and a nut. VDO 320.011 is that stud: one wire, 1/8-27 NPTF, 287 to 23 ohms, yellow insulator. If the adapter female is 1/4 inch, 320.011 needs a 1/4 to 1/8 bush. VDO 323-801-001-058C is the same curve with an M4 knurled nut on an R 3/8 BSPT body. That one can go straight into a 3/8 BSPT pump port, and the reducing nipple comes off. On the 3JH2-TE the sender sits in a reducing adapter on the fresh-water pump, about 1/4 inch on the sender and 3/8 or 1/2 inch in the pump. Measure both threads. A 3/8 BSPT hole is 19 threads per inch and a 3/8 NPT hole is 18. Forcing NPT into a BSPT hole will chew the housing. A two-pin isolated sender uses 6.3 mm spades. That is the normal terminal on a ground-isolated sender: one spade is the signal, the other is the ground wire. KUS and ECMS sell the European curve as well, and the listings I checked are also 6.3 mm pins. Veratron still sells 323-801-001-058C under that same number.

144626-91570 — Affiliate Parts Search

As an Amazon Associate I earn from qualifying purchases. Other links (eBay, AliExpress) are also affiliate links. They help pay for the site, at no extra cost to you. More

Fitted to

Engines, drives and generators whose parts catalogue lists this part. Open any for its exploded parts list.

Engines

Supersession

Replaces (older)
Part No.DescriptionCodeApplies
144626-91590 SENDER UNIT, CW D=E/#81847

OEM interchange

Other OEM part numbers for the same part — order from any of these makers or their dealers.

Aftermarket equivalents cross-ref

Third-party equivalents (Jabsco, Sierra, WIX, Mann…) — not OEM; verify before ordering. Usually cheaper than the marine dealer.

Equivalent P/NBrandDescriptionSourceConfidenceShop
320.011 VDO 1-wire, M4 stud (catalogue terminal: thread). 1/8-27 NPTF. 40-120C, 287-23 ohm, yellow insulator. VDO Australia temperature-sender spec… vdo-webshop.nl likely
323-801-001-007N VDO 1-wire, 6.3 mm spade. 3/8-18 NPTF. VDO 40-120C curve 287.4-22.7 ohm. Threaded body. Gauge only. Measure the thread. vdo-webshop.nl likely
323-801-001-009N VDO 1-wire, 6.3 mm spade. 1/4-18 NPTF. VDO 40-120C curve 287.4-22.7 ohm. Threaded body for the pump adapter. Gauge only. Measure the thread. vdo-webshop.nl likely
323-801-001-010N VDO 1-wire, 6.3 mm spade. 1/2-14 NPTF. VDO 40-120C curve 287.4-22.7 ohm. Threaded body. Gauge only. Measure the thread. vdo-webshop.nl likely
323-801-001-058C VDO 1-wire, M4 stud with knurled nut. R 3/8 BSPT (DIN 2999). 287.4-22.7 ohm, 40-120C. Screws into a 3/8 BSPT pump port. Veratron sells this… vdo-webshop.nl likely
323-805-001-004N VDO 2-pin ground-isolated, 6.3 mm spades. 1/2-14 NPTF. Same VDO 40-120C curve 287.4-22.7 ohm. Signal on one spade, ground wire on the other.… vdo-webshop.nl likely
323-805-001-005N VDO 2-pin ground-isolated, 6.3 mm spades. 3/8-18 NPTF. Same VDO 40-120C curve 287.4-22.7 ohm. Signal on one spade, ground wire on the other.… vdo-webshop.nl likely
323-805-001-007N VDO 2-pin ground-isolated, 6.3 mm spades. 1/4-18 NPTF. Same VDO 40-120C curve 287.4-22.7 ohm. Signal on one spade, ground wire on the other.… vdo-webshop.nl likely

Used in 14 places

Every catalog figure this part is placed in, the model(s) it applies to, and its reference/level/quantity.

Model(s)CatalogFigurePageRefLevQty
3JH2, 3JH2-TE 3JH2CE_TCE_0CR10-G41800 Fig 35. SENSOR(OPTIONAL) 41 8 1 1
3JH3CE, 3JH3E, 3JH3E(EPA) 3JH3_E_EEPA_CE_2 Fig 38. WIRE HARNESS & SENSOR 47 20 1 1
3JH3CE, 3JH3E, 3JH3E(EPA) 3JH3_E_EEPA_CE Fig 38. WIRE HARNESS & SENSOR 43 20 1 1
3QM 2QM20_3QM30_2QM_3QM Fig 20. INSTRUMENT PANEL 36 19-2 ▲ 2 1
4JH2-UTE(B) 4JH2_E_TE_HTE_DTE_UTEB Fig 44. WIRE HARNESS & SENSOR(4JH2-UTE) 59 16 1 1
4JH2-DTE, 4JH2-HTE, 4JH2-TE, 4JH2-UTE(B), 4JH2E 4JH2_E_TE_HTE_DTE_UTEB Fig 54. WIRE HARNESS & SENSOR(C,D,E TYPE) 69 8 1 1
4JH2-UTE(B) 4JH2_E_TE_HTE_DTE_UTEB_2 Fig 44. WIRE HARNESS & SENSOR(4JH2-UTE 59 16 1 1
4JH2-DTE, 4JH2-HTE, 4JH2-TE, 4JH2-UTE(B), 4JH2E 4JH2_E_TE_HTE_DTE_UTEB_2 Fig 54. WIRE HARNESS & SENSOR(C,D,E TY 69 8 1 1
4JH3-DTE, 4JH3-HTE 4JH3_HTE_DTE Fig 38. WIRE HARNESS & SENSOR 40 22 1 1
4JH3-TBE, 4JH3-TCE, 4JH3-TE, 4JH3CE, 4JH3CE1, 4JH3E 4JH3_E_CE_CE1_TE_TCE Fig 54. WIRE HARNESS & SENSOR 63 22 1 1
4LH-DTE, 4LH-HTE, 4LH-STE 4LH_TE_HTE_DTE_STE Fig 75. SENSOR 104 7 1 1
4LHA-DTE(P), 4LHA-DTZE(P), 4LHA-HTE(P), 4LHA-HTZE(P), 4LHA-STE(P), 4LHA-STZE(P) 4LHA_STEP_STZEP_DTEP_DTZEP_HTEP_HTZEP Fig 62. WIRE HARNESS & SENSOR 81 17 1 1
6LPA-STP2, 6LPA-STZP2, 6LPA-STZP3 6LPA_STP2_STZP2_STZP3 Fig 55. WIRE HARNESS & SENSOR 63 20 1 1
6LP-DTE, 6LP-DTZE, 6LP-DTZEP1, 6LP-STE, 6LP-STZE, 6LP-STZEP1 6LPA_DTEP_DTZEP_DTZEP1_STEP_STZEP_STZEP1 Fig 62. WIRE HARNESS & SENSOR 70 20 1 1